Fix Redmi 9 Power Dead Boot Problem
Hey! dear, my name is Md Ilias, and welcome to Techforus.in, if you are getting problems in your Redmi 9 power (dead, hang on logo, only fastboot mode) today I am here to fix Redmi 9 power dead boot problem.
One thing you have to know before going to the main topic is if your phone going to Fstboot mode then you can flash this phone by official tool or if your phone going to auto Edl mode then this is the tutorial for you and it will help a lot to fix your Redmi 9 power dead boot problem.
Something important! Auto Edl or Qualcomm HS-USB Qdloader port may be a hardware issue so keep in mind the fact.
Okay! let’s start the tutorial, My name is Md Ilias, Diploma in Information Technology from Aliyah University. 8 years of experience in the Software and Hardware field. If you want to consult with us about any kind of technical problems then feel free and contact us here.
This website is part of the Atscore pvt.ltd Company
Redmi 9 Power Specefication:
You may also like:
If you want to know about Android Phones Problem and solution. So you can check here these links-
- Unlock Bootloader on Redmi Note 9 Pro (Updated)
- How to Flash Redmi Note 9 Pro (Updated)
- How to Root Redmi Note 8 Pro (Steps)
Benefits of Redmi 9 Power Dead Boot Repair
Bootloader: After flashing the official Flash file it Will relock Redmi 9 power bootloader if you have unlocked it before.
Custom Recovery: It will help you to remove Custom Recovery like TWRP and Orange FOX.
Root: If you have rooted your Redmi 9 power and somehow it’s in a dead mode. After flashing the Redmi 9 power dead boot flash file, it will remove the Root and Fix the dead problem.
Download Zone:
- Qualcomm USB Driver
- Xiaomi Flash Tool
- ADB and Fastboot Driver
- QPST Tool
- Qc-Fire flash tool for UMT Dongle
- Latest Redmi 9 Power Dead Boot Firmware/ Flash File/ Stock ROM
How to Fix Redmi 9 Power dead Boot problem
Now we are going to the main topic, we will fix Redmi 9 Power dead boot so in that case, you need to download some files from the above link. Make sure you have downloaded all the files.
Requirements:
- A best working data transferble cable
- A Personel Computer(Desktop/Laptop)
- Redmi 9 Power dead phone
- A UMT Dongle or QPST tool
- And the last one must read the complete blog without skiping otherwise you will not be able to fix the Redmi 9 Power Dead Boot Problem.
How to Flash Redmi 9 Power
Read carefully all the steps to Flash the Redmi 9 Power
Step 1:
Download all the files and extract them on the Desktop with “WinRAR”.
Step 2:
Install Qualcomm USB Drive, Adb and Fastboot Driver, Xiaomi Flash Tool, and QPST flash tool. In this article, we will use UMT Dongle so must Download the Qc-Fire Flash tool for UMT Dongle and install the Qc-Fire setup.
Step 3:
I hope you have done all the above steps before then you can proceed to the next Also you can watch this video
Step 4:
Insert the UMT dongle run the Ultimate Qc-fire tool and select “Flasher”.
Step 5:
After all, click on “Multi Programm mode”
and click select the Firmware
and then selcte “images” folder.
Step 6:
Now we are in the last stage connect your Redmi 9 Power with sorting the test point and click on Flash.
It will take 10- 20 minutes to complete the whole flashing so please wait and see the magic after completing the flash process, Disconnect the phone and press the power key for a while until the “MI” screen. Now release the key and wait to complete boot.
Conclusion:
These are all the steps to fix Redmi 9 Power dead boot problem. If you are still getting any errors then leave your valuable comment below or you can join our Telegram channel “https://t.me/theatscore” to get direct support. We will defiantly try to help you with our both support systems.
Thank You.
About the Author
