Hey guys, What is up?
I hope all are doing well. Today I am here with a new tutorial. In this tutorial, I’m going to show you how you can flash your “Samsung Galaxy J2 SM-J200G” safely.
Just download the J2 SM-J200G flash file and tool from below download section and flash stock ROM as shown in the tutorial.
J2 SM-J200G Firmware [Flash File] is 100% working and tested by our-self, so no need to worry about it. Flashing firmware on J2 SM-J200G the phone is 100% safe and it will help you to unbrick your device again.
Benefits to Flash Stock ROM
· Flashing the firmware will help to remove all issues of the device
· Fix all software related issues on J2 SM-J200G mobile
· Repair the IMEI number or null IMEI problem on J2 SM-J200G
· Solve network issues on J2 SM-J200G mobile.
· Reboot problem fix by flash ROM on J2 SM-J200G mobile
Table of Contents
Important Notes
- Do not try to flash this ROM to another Samsung or another Android phone. This ROM only for Galaxy J2 SM-J200G.
- And at least your phone should have a 40-50 percentage of charge.
- Read the instruction carefully, because we are not responsible for any kind of problem.
Requirements
To flash stock ROM in your Samsung Galaxy J2 SM-J200G, you need some basic requirements.
1. A Computer (Laptop/Desktop)
2. A USB cable
3. Internet connection for downloading the flash files and tools
4. Your Samsung Galaxy J2 SM-J200G should have at least 30-40 percentage of battery to perform the flashing process.
Download these files
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Download Samsung Galaxy SM-J200G stock firmware (Flash File)
File Name- J200GDDU1AOI3-J200GODD1A0I3_INS.ZIP
Country- India
File size- 938 MB
Android Version- 5.1.1
Stock ROM link- click here to download
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Flash Samsung Galaxy J2 SM-J200G
1. Download and install the USB Driver on your Computer. You can skip this step if you have already installed it.
2. Download the Flash file/Stock ROM and extract it on your PC. After extracting you will find these types of files.
3. Now, Power off your phone.
4. After power off your phone, You have to boot your phone into Download Mode, to boot into Download mode: press and hold Volume down key, Home key and Power key. When the phone vibrates leave the Power key but keep pressing the Home key and Volume down key. After a few seconds, you will boot your phone into Download mode.
5. After entering the Download mode you will able to see a warning “sign” in this condition you have to press Volume Up key to continue.
Now, Download and install Odin flashing tool on your PC
1. After downloading and installing the Odin flashing on your PC.
2. Now, open Odin.exe and connect your Galaxy J2 SM-J200G through the USB cable.
3. Once you have connected the phone to the computer, the Odin flashing tool automatically detects the phone and shows “added”.
4. Now, click on PDA select “D08*******************87_HOME.tar.md5” where you extract your flashing file.
5. Now Odin checking your PDA file
6. After checking the file, press the Start button to begin the flashing process
After completing the flashing process you will able to see the green “Pass” message, which means everything is okay. Now unplug the USB cable.
Now your Samsung Galaxy J2 SM-J200G may be facing a boot loop problem.
To solved this problem.
- Power off your phone.
- Boot into stock recovery mode
- To boot into stock recovery mode: press and hold Volume Up key, Home key, and Power key. When the phone vibrates leave Power key but keeps holding the Home key and Volume Up key.
- Now your phone boot into stock recovery mode.
- In Recovery Mode, your phone’s touch does not work in this situation, “Volume up” for scroll up “Volume Down” for scroll down and “Power key” for the “OK” button.
- Now scroll down and select wipe data/factory reset.
- Once data is cleared now press the reboot the system on the recovery menu.
If your flashing process fails comment down.
Thanks, it's work for me